-
Recent Posts
- Home Energy Management System Part 4: Characterising the Hypervolt Current Transformer
- Home Energy Management System Part 3: Planning the hardware
- Home Energy Management System Part 2: Hacking the iBoost+ protocol
- Home Energy Management System Part 1: Objectives
- Adding filament monitors to the Hemera tools
Recent Comments
Bill quintal on Alternator failure warning in… Sam on Home Energy Management System… Steve on Home Energy Management System… Warren Daniel on Troubleshooting old Century… Charlton on Troubleshooting old Century… Archives
Categories
Meta
Monthly Archives: November 2015
Print bed surface roundup
This time I will discuss the various print surfaces I have used and my experiences with them. Your results may differ.
Upgraded arms for the large delta printer
My large delta printer has been working quite well since the last round of upgrades, but two issues have been bugging me. First, although spiral vase prints were excellent with perfect layer registration, some other prints showed a small misalignment … Continue reading