-
Recent Posts
- Home Energy Management System Part 4: Characterising the Hypervolt Current Transformer
- Home Energy Management System Part 3: Planning the hardware
- Home Energy Management System Part 2: Hacking the iBoost+ protocol
- Home Energy Management System Part 1: Objectives
- Adding filament monitors to the Hemera tools
Recent Comments
Bill quintal on Alternator failure warning in… Sam on Home Energy Management System… Steve on Home Energy Management System… Warren Daniel on Troubleshooting old Century… Charlton on Troubleshooting old Century… Archives
Categories
Meta
Monthly Archives: June 2014
Five Tips for using dc42 Firmware on the RepRapPro Ormerod
Many of you know me better as dc42 on the RepRapPro and Arduino forums. As the owner of an Ormerod 3D printer and an embedded software engineer (amongst other things!), I forked the RepRapFirmware github repository early in 2014 in order … Continue reading
Posted in 3D printing
4 Comments