Monthly Archives: February 2015

Upgrading the Mini Kossel to Duet Electronics Part 4: the Z probe

Posted on February 5, 2015 by davidcrocker

In earlier posts in this series, I described how to install and connect Duet electronics on a Mini Kossel, how to install and configure the firmware, and how to calibrate the printer. In this post I cover using a Z … Continue reading →

Posted in 3D printing | Tagged Delta 3D printers, Duet electronics, Kossel | 15 Comments

	davidcrocker on Home Energy Management System…
	Mark on Home Energy Management System…
	davidcrocker on Five things I never use in Ard…
	Leif on Five things I never use in Ard…
	Bob Black on Upgrading the Mini Kossel to D…

Monthly Archives: February 2015

Upgrading the Mini Kossel to Duet Electronics Part 4: the Z probe

Recent Posts

Recent Comments

Archives

Categories

Meta