-
Recent Posts
- Home Energy Management System Part 4: Characterising the Hypervolt Current Transformer
- Home Energy Management System Part 3: Planning the hardware
- Home Energy Management System Part 2: Hacking the iBoost+ protocol
- Home Energy Management System Part 1: Objectives
- Adding filament monitors to the Hemera tools
Recent Comments
Bill quintal on Alternator failure warning in… Sam on Home Energy Management System… Steve on Home Energy Management System… Warren Daniel on Troubleshooting old Century… Charlton on Troubleshooting old Century… Archives
Categories
Meta
Monthly Archives: August 2015
More upgrades to the large Delta 3D printer
In this post I describe three further upgrades: 24V power, moving the electronics under the bed, and the Robotdigg aluminium effector.
Upgrading the large delta printer
In my previous entry I described my large Kossel-derivative delta printer. Since building it, I have upgraded it in a number of ways, which I will now describe.